Top 10 Best Mortise Jig Based On Scores

Best Mortise Jig
Disclaimer: As An Amazon Associate We Earn From Qualifying Purchases.
NoProductScoreAction
1Trend LOCKJIG Lock Jig for Routing Face-Plate Recess and Mortise9.6Buy On Amazon
2Pro-Lok INJIGC-Mort Mortise Lock and Faceplate Installation Jig Kit9.6Buy On Amazon
3Trend U*LOCK/JIG/A Lock Jig Large with Baldwin Templates9.4Buy On Amazon
4Woodhaven 8536 3-1/2" Hinge Jig9Buy On Amazon
5Foundations of Woodworking: Essential joinery techniques and building strategies9Buy On Amazon
6Woodhaven 8570 1" x 2-1/4" Lockset Jig8.8Buy On Amazon
7MILESCRAFT HingeMate350 Entry and Passage Door Hinge Jig8.6Buy On Amazon
8Mophorn 6-Piece Door Lock Hole Opener Kit8.4Buy On Amazon
9Trend LOCK/JIG/B Adjustable Trade Lock Jig for Mortice Lock and Latch Faceplates8.4Buy On Amazon
10Bora Router Dado Jig8.2Buy On Amazon

Table Of Content:

1. Trend LOCKJIG Lock Jig for Routing Face-Plate Recess and Mortise

  • QUICK AND SECURE: With its tool-free setup, the Trend Lock Jig is very fast to set to any door width from 34mm to 58mm wide; Full-length clamping plate ensures jig remains rock solid in use, secured with locking levers and twin clamping knobs.
  • ADJUSTABLE SIZES: The set of 12 lock face plate and 4 lock case templates supplied are held in the Lock Jig with magnets for fast swapping, requiring just one router and cutter to do both the lock case mortice and the faceplate.
  • FULL INSTRUCTIONS: A comprehensive laminated reference sheet with common lock model also offers a secondary chart on the reverse side for info relating to faceplate and lock case sizes to quickly select the correct templates and achieve perfect results.
  • EASY TO USE: Each template is stamped to indicate the locks it can be used with; 4-lettered plates for lock cases and 12-numbered plates for the faceplates; Simplifying and speeding up the selection process as well as eliminating costly errors.
  • NEEDED ACCESSORIES: To rout the lock case mortice, a router with an 80mm plunge and fitted with a 30mm guide bush is required, along with a suitable 12mm diameter cutter with an overall length of 115mm to achieve the maximum mortice depth of 70mm.

2. Pro-Lok INJIGC-Mort Mortise Lock and Faceplate Installation Jig Kit

  • The Mortise Lock Installation Kit comes with everything needed to cut professional quality, fast and accurate mortise pockets and face plates for Schlage, Sargent, Corbin Russwin, Kaba, and other door hardware.
  • The mortise jig is quick and simple to set up, self centering and securely clamps onto the door edge securely.
  • This professional kit includes three of the most common carbide-tipped wood cutting bits – 7/8”, 1”, and 1-1/4” diameter.
  • For use on hard wood, soft wood, composite doors and even aluminum doors (with the use of special cutters).
  • Protect and store tools in a custom heavy duty case

3. Trend U*LOCK/JIG/A Lock Jig Large with Baldwin Templates

  • Suitable for two sizes of Baldwin locks with faceplate sizes 1 1/4″ x 8″ or 1″ x 8″ and mortise sizes 1″ x 5 23/32″ or 7/8″ x 5 23/32″.
  • Fast, clean & accurate results on doors 1 5/16 inch to 2 1/4 inch thick, even in hardwood.
  • Adaptor plate included to allow smaller templates to be fitted (as supplied with standard LOCK/JIG)

4. Woodhaven 8536 3-1/2″ Hinge Jig

  • 3-1/2″ Hinge Jig w/5/8″ radius corners
  • Fastest, easiest, least expensive and most accurate way to cut a hinge mortise.
  • Made of 10mm (.393”) thick phenolic for heavy duty use, measures 5-5/8″ x 7-5/8″.
  • Uses a bearing guided bit (our 8500 – sold separetly), or bushing & bit combination (5030K & 13416 – sold separately), to follow the jig for perfect mortises.
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!

5. Foundations of Woodworking: Essential joinery techniques and building strategies

6. Woodhaven 8570 1″ x 2-1/4″ Lockset Jig

  • 1″ x 2-1/4″ Lockset Jig
  • Fastest, easiest, least expensive and most accurate way to cut a lockset plate mortise.
  • Made of 10mm (.393”) thick phenolic for heavy duty use, measures 3-5/8″ x 5-5/8″.
  • Uses a bearing guided bit (our 8500 – sold separetly), or bushing & bit combination (5030K & 13416 – sold separately), to follow the jig for perfect mortises.
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!

7. MILESCRAFT HingeMate350 Entry and Passage Door Hinge Jig

  • Templates for 2-1/2″, 3″, 3-1/2″, 4″ and 4-1/2″ hinges; 1-1/8 x 2-3/4, 1-1/2 x 2-1/4 strike plates; 1″ x 2-1/4″, 1-1/8″ x 2-1/4″, and 1-1/8″ x 2-3/4″ latch plates.
  • Sturdy steel frame adjusts from 1-3/8″ to 1-3/4″ doors and jambs
  • Centered tabs on each template ensure complete accuracy
  • Includes 1/2″ router bit with bearing, spring-loaded corner chisel and self-centering hinge bit
  • Easy Measure Guide is included to simplify standard industry placement of your door hardware

8. Mophorn 6-Piece Door Lock Hole Opener Kit

  • 6 PIECES KIT – This 6-piece door lock mortising kit involves 1 jig kit door lock motiser with 3 cutters, 2 allen keys and 1 spanner.
  • 3 CUTTERS – Cutters made of tungsten steel, higher quality over high-speed steel.
  • APPLICABLE DOOR RANGE – The lock mortising kit can be used on wooden and aluminum doors with thickness under 13.
  • EASY OPERATION – Applying vertical guides with height and depth stops, overrun cutting area will be avoided by using this tool set.
  • ACCURATE AND FAST – Robust construction and precise manufacture.

9. Trend LOCK/JIG/B Adjustable Trade Lock Jig for Mortice Lock and Latch Faceplates

  • INFINITELY ADJUSTABLE: Sliding plates and stops for mortice and faceplates from 30mm up to 250mm long, ideal for use with obscure sized locks as well as all standard locks and latches.
  • COMPATIBILITY: For use in a 1/2-in capacity router with 80mm plunge capacity fitted with a 30mm guidebush and 12mm cutter; Suitable Trend cutters: 3/75X1/2TC, TR37X1/2TC, C172X1/2TC.
  • QUICK AND EASY SET UP: Engraved on underside to allow fast, accurate set up for common door widths of 35mm, 40mm, 44mm and 54mm.
  • RECOMMENDED USE: Adjustment range makes it the ideal jig for precision fitting the mortice positions for multi-point lock strips into wooden doors; For lock faceplates of lengths up to 250mm.
  • ADAPTABLE SLIDING PLATE AND STOP ADJUSTMENTS: Useful with different guidebush diameters and straight cutters for general mortice work in construction projects.

10. Bora Router Dado Jig

  • MAKE STRAIGHT, ACCURATE DADOS AND RABBETS – Woodworkers asked us for a router guide / router jig that would make precise Dados, Rabbets, and Mortise cuts.
  • WORKS WITH THE BORA WTX and NGX CLAMP EDGES – The perfect addition to your woodshop, this dado router guide will help with all of your woodworking projects.
  • WORKS WITH ALMOST ALL MAKE/MODEL ROUTER – Includes a 1” standard guide bushing for easy mounting (works with almost any routers).
  • VERSATILE CUTTING FOR WIDE DADOS – Cutting adjustment allows for cutting wide dado’s with a 1/4″ 3/8″ or 1/2″ router bit.
  • LARGE PLATE SIZE FOR EASIER HANDLING – The large plate size ensures your router stays steady, and is easy to handle.
  • Our router plate is not designed for palm routers.