Welding is the best way to join two metal pieces. In our day to day life, there are a lot of things that require welding when they break. For example, the rod of our windows, different garage tools like an axe, or many other objects.
However, if you own an inverter welder, then joining two pieces of metallic objects is a lot easier for you. But it is a bit tricky to choose the best inverter welder as it requires a lot of research.
I have been researching this a lot lately, and have found some of the top-rated inverter welders you can ask for. Check out my inverter welder reviews below to find out more about these welders.
Why Do You Need an Inverter Welder?
There are a few inverter welding machine advantages over a regular welder. This is why you should have an inverter welder of your own. I would like to talk about those advantages before I start with my inverter welder reviews.
Small & Portable
Usually, inverter welders are small and portable compared to general welders. Regular welders are stationary and very heavy. You cannot lift them and take wherever you want. But when it comes to inverter welders you can easily carry them as they are quite light weighted.
Inverter welders are compact which is why you can easily store them anywhere you want. You cannot place a regular welder like this. You have to place a regular welder to a spot permanently and you cannot move it.
Easier to control
Inverter welders are way easier to control than transformer welders. You can vary the voltage input and amperage of an inverter welder. By doing so you can change the power level and the level of heat energy that melts the welding material.
Hence, you can use inverter welder for different types of welding according to your needs. For heavy-duty or professional welding operations an inverter welder is not a good choice. But at home, it is the best choice. It is way better to choose an inverter welder for personal or household works because of its flexibility.
Saves Energy & Quite Efficient
Inverter welders are capable of running with a low input voltage. And they can give consistent output energy too. By doing so, inverter welders save a lot of energy.
Some inverter welders allow multiple types of welding at the same time. And their portability makes it easier to operate them. This is why working with inverter welders are more efficient.
Output Current & Voltage Stability
All the inverter welders have an anti-interference, and they are less susceptible to temperature changes and voltage fluctuations. This is why no matter how much the voltage changes in the input, on the output the voltage and the current flow always stay very stable.
These were all the inverter welder advantages for which you should own an inverter welder.
How Many Types of Inverter Welders Are There?
Before I start with my inverter welding machine reviews, I will talk about the types of inverter welders you will find in the market. If you learn about these types, it will help you to choose the right inverter welder for your job.
MIG Inverter Welder
MIG welding means for metal inert gas welding. It is a simple welding process and you will need a short time to master this welding technique. This welding metal is used for welding and you have to set the welder parameters and choose the right type of shielding gas. However, the welder used for MIG welding is a MIG inverter welder.
TIG Inverter Welder
Tungsten inert gas (TIG) welding or Gas Tungsten Arc Welding (GTAW) is a welding technique where you use tungsten instead of metal. It is more sophisticated compared to MIG welding. It requires a TIG gun or torch which has a tungsten electrode (non-consumable). This electrode heats the welding material that results in a weld. The inverter welder that is used for TIG or GTAW welding is called a TIG inverter welder.
Stick Inverter Welder
Though the name stick welding is popular around the world this welding is actually called Shielded Metal Arc Welding or SMAW in short. This is another simple welding process which involves a flux-coated consumable electrode. The welding arc is generated between the working materials and the electrode. The inverter welder used for this kind of welding is called the stick inverter welder.
Arc Inverter Welder
The last type of welding process is called arc welding. It is also called flux-core welding. It is quite similar to MIG welding. Because in that both welding processes, an electrode (consumable) is used which constantly requires to be fed with wires to create an arc of welding.
The difference between the two is, in arc welding, a flux core is used to create the shielding gas whereas in MIG welding external gas source is used. However, arc inverter welders are used for arc welding only.
Now that you’re familiar with different types of inverter welders, you can now check out my inverter welder reviews below.
Best Inverter Welder Reviews
Above I have talked about different types of inverter welders. Below are some of the best inverter welding machine reviews where I have included all the different types of inverter welders.
ZENSTYLE Portable DC Inverter Arc Welding Machine
Material: Plastic Handle, Steel Frame
Net Weight: 17.88 Pounds
Power Cord Length: 6.5 Feet
Input Power: 230V/60Hz
Output Range: DC: 115V/230V, 5-160A
Output Current (Rated): 23V, 160Amp
The ZENSTYLE inverter welder is one of the best inverter arc welders for many reasons. First of all, it has a dual voltage design. This design ensures that you get the full input power without any loss. It also helps to save energy as it has IGBT module technology.
You can use this welder for welding stainless steel, mild steel, aluminum, and many other metals. Maintaining or repairing this welder is very easy and it is very lightweight. As it has a carrying handle so it is very easy to carry and its compact shape makes it very easy to store.
This is an inverter welder and hence you can plug it into a 110 volts’ socket instead of a high volt socket. It includes under-voltage protection, over-voltage protection, overload protection, and over current protection so that you are always safe while using it.
This welder can switch from AC power to DC and then achieve the proper level of current and voltage. This is why it is ideal for MMA welding of high frequency. This welder package includes a work clamp with a 6.7 feet cable, an electrode holder with 5 feet cable, a plug and an input adapter cable. Click here for the prize of this welder.
Klutch MIG 140i Flux-Core Welder Inverter
Net Weight: 22 pounds
Welding Type: MIG Welding
Power Required: 120 Volts
The Klutch MIG 140i Flux-Core Welder is one of my favorite ones. It has a high power welding ability. But it weighs less. This is why you can easily carry it to your job spot.
As it is an inverter welder, it handles the fluctuation in input power better than non-inverter welders. Thus you get consistent output power and your welding material looks better and well finished.
It only requires 120 volts of input power to run. This less input power saves a lot of energy compared to any transformer welder. It can save up to 25% energy.
Unlike most other inverter welders, this one is versatile. It can handle stainless steel, mild steel, and aluminum. These are all different types of metal but it is not a problem for the Klutch MIG 140i Flux-Core Welder to handle.
Finally, this inverter welder can weld 3/16 inches of steel at one pass. This is why it results in a smooth surface after you are finished with the welding. Check out its price here.
SUNGOLDPOWER ARC MMA 200A DC Inverter Welder
Input Voltage: AC 110/220 Volts (auto switch)
Frequency: 50/60 Hz
Welding electrode: 1.6-4.0 mm (220 volts) & 1.6-3.2 mm (100 volts)
Welding Thickness: 1 mm to 20 mm
Input Current: 32 Ampere
Output Current: 20 to 200 Ampere
No-Load Voltage: 62 Volts
Net Weight: 14.99 Pounds
The SUNGOLDPOWER ARC MMA 200A DC Inverter Welder is a bit heavier than most other welder. So you will find it a little difficult to carry. But don’t worry about it. Because it has much better features compared to other welders.
For example, this welder is a full-bridge welder. That means AC power will convert into DC power when you give input. Many low quality welders are not full-bridge welders and so they are not long-lasting. As high quality components are used to support this welder, it has a longer lifespan.
This welder has an advanced control module. The IGBT dual voltage technology supports both 220 and 110 volts. This enhances the welding performance if this machine.
This is an anti-sticking welder which prevents against over-loading of power. So, you will be safe from over-current and over-voltage or under-current and under-voltage.
It is easier for you to remove the electrode after welding is done. There is a thermostatic controller to control the welding temperature. If you are already liking this welder, you can check its price here.
Amico Stick Arc DC Inverter Welder
Net Weight: 20 Pounds
Type: Stick Arc Welding
Material: Plastic ABS, Metal
Power Source: 100V to 250V, 50Hz to 60Hz
Amperage Capacity: 200 A
The Amico Stick Arc DC Inverter Welder is an industrial level welder but is very easy to use. It has a force adjustment function that allows you to use the cellulose electrode as well as other electrodes efficiently.
This welder includes advanced IGBT inverter technology for which you will always get constant output power no matter how much the input fluctuates. The arc is very stable in this welder and it has an anti-sticking feature to stop the welding material from sticking.
It includes an LED amperage display that is helpful for users who are new to welding. As it has amperage control options so it is very easy to start and operate. This welder has automatic compensation to protect from over-voltage, over-load or over-current.
This inverter welder is optimized to provide a high-quality weld. This helps to avoid any kind post-weld cleanup. And finally, as its components are very strong so this inverter welder is reliable for both professionals and personal use. Find out its price right here.
Mophorn MIG TIG Arc Inverter Welder
Welder Type: MIG/TIG
Voltage: 220 Volts
Output Current: 20A to 200A
Wire Speed: 2.2 m/min to 12 m/min
Mophorn MIG TIG Arc Inverter Welder is a multi-type welder that you can use for MIG, TIG, and Arc welding. It has the IGBT technology that allows you to control the current flow, so you can achieve stable and high-quality performance.
To achieve airless welding easily, it has Lux cored wire adapters. Air bubbles cause poor welding if it occurs inside the welded area. With the help of this adapter, you can avoid such a risk.
This welder can release metal inert gas automatically while welding. Thus it prevents oxidation on the welded part and ensures that the part is long-lasting.
As it allows different types of welding so you have to switch between welding modes. Switching the mode is really easy. It is equipped with an LCD monitor. This monitor shows the ampere and voltage of the inspection. It is very easy to use and inspect the monitor.
The current and the voltage of this inverter welder is adjustable so that you can get the perfect current flow with your required input voltage. Moreover, there is a high-quality wire feeder with this welder that ensures a smooth wire feed.
Finally, you can use this for home repairing and DIY works, and welding regular thin iron and steel. This is a compact and lightweight welder with a well-built carrying handle which is suitable for carrying anywhere easily. Click here for the prize of this welder
HITBOX MIG Welder 200Amp Inverter Welder
Inverter technology: IGBT
Input voltage: 220 Volts, 50/60 Hz
Applicable Thickness: Over 0.8mm
Net Weight: 21.38 Pounds
Material: Iron, Copper, Aluminum
Power Source: DC, 220 volts
The HITBOX Inverter Welder is a multi-function welder which is capable of performing MIG welding, Arc welding, and TIG welding. This is a self-shielded, gas, and no gas welding machine.
You can use it for iron and stainless steel welding. While you are welding you can choose between flux-cored or solid wire for no gas or gas welding. As it is very easy to operate so it is a great inverter welder for beginners.
It has a simple but great design which not only looks beautiful but also very compact. It is lightweight and very easy to carry. You can store it anywhere you want without killing much space.
This inverter welder includes earth clamp, an MB15 MIG gun, a gas tube, an electrode holder, a portable plug, and a flux-cored wire (1.0 mm & 1 kg). You can use it by directly plugging it into a DC power source or by using a generator too. Check out its price here.
Lotos TIG200ACDC Aluminum TIG Welder
Welding Type: TIG, Stick
Output Ampere: 10A to 200A
Input Type: AC/DC, 110/220 V Dual
Welding Capacity: 3/8 Inches
Foot Pedal: Included
The Lotos TIG200ACDC is TIG Welder with a 200-ampere square-wave AC inverter. This type of inverter maintains the accuracy of aluminum welding. But aside from aluminum, it is also suitable for stainless steel and thinner gauge materials.
This welder has hand torch control for controlling the welding material and a foot pedal control to control the heat of the welding. As you can control the heat, you can use it for mild steel, stainless steel, aluminum, and many other metals.
The PAPST advanced cooling system used in this welder keeps the plasma cutter stable. The plasma cutter is very durable and provides high performance. In this welder, there is a dual voltage input so that you can use either based on your desire.
This welding set includes TIG torch, power supply, foot pedal, Stick/MMA clamp, 110V/220V converter pigtail, argon regulator, consumable set, ground clamp, etc. Find out its price right here.
My Final Words
I hope my inverter welder reviews help you find your desired welder. You can choose any one of these welders and I can assure you that you will be satisfied with their performance. If you have any questions you can ask me in the comment section and I will try to help you as soon as possible. Thank you.