The air regulator of an air compressor is a small mounting but it has a very important job. That is to keep the air pressure at a constant level. To have the most efficient output, you need the best air regulator for compressor.
Finding the best one is a bit tricky as there is a lot of research to conduct. But you don’t have to worry about that because I have already gathered the best ones through deep research. I am sharing my favorite air regulators below.
Table of Contents
Comparison of the Best Air Compressor Regulator
[ninja_tables id=”1535″]
Best Air Compressor Regulators
Bostitch AB-9051114 Air Compressor Replacement Pressure Regulator
Specifications
- Max. Allowable Pressure: 120 PSI
- Weight: 7 Ounces
- Length: 2.8 Inches
- Width: 2.8 Inches
Review
The Bostitch AB-9051114 Air Compressor Replacement Pressure Regulator will help you to accurately regulate the pressure of your air compressor. This is important for the efficiency of the air compressor.
This regulator is very easy to set up and the gauge shows accurate pressure. And you don’t have to worry about air leaks because this regulator will tightly seal the air. Moreover, it will serve you for a long time without any damage.
If you only want a ¼ inch knob, you can get the Bostitch BTFP72326 Regulator. This is pretty much the same as the AB-9051114 but it is only for ¼ inch NPT.
Primefit CR1401G Replacement Air Regulator
Specifications
- CFM Rating: 60 SCFM at 100 PSI
- Pressure Regulation: 160 PSI
- NPT Size: ¼ Inch
- Weight: 6.4 Ounces
Review
The Primefit CR1401G Replacement Air Regulator will precisely maintain and regulate the air pressure of your air compressor. Its knob is made of high-impact composite material. This is why it’s very strong and I consider it the best air compressor regulator filter.
It has a steel-protected gauge so it will last longer than other air regulators. If you need an ¼ inch NPT size air regulator, this is one of the best ones you can choose. It is designed for any type of air compressor.
Craftsman D27253 Compressor Regulator
Specifications
- Length: 4 Inches
- Width: 2 Inches
- Height: 2 Inches
- Weight: 8 Ounces
Review
For durability and consistency, you can choose the Craftsman D27253 Compressor Regulator. This is one of the best air compressor filter regulators for being robust and accurate.
You can use this air regulator on any air compressor. No matter what size your air compressor is, this air regulator is designed to be compatible with the size. It is also designed to last longer and serve for a long period of time.
Tailonz Pneumatic AW2000-02 Air Filter Pressure Regulator
Specifications
- NPT Size: ¼ Inch
- Pressure Range: 145 PSI
- Temperature Range: 32 – 140ºF
- Material: Copper
- Airflow: 20 SCFM
- Weight: 12.8 Ounces
Review
If you are looking for a filter regulator that has a fiber filter, the Tailonz Pneumatic AW2000-02 Air Filter Pressure Regulator is the perfect choice for you. It has a very powerful filtration capacity and air filtration is quite effective.
The pressure gauge in this regulator has a purple copper core. This gauge shows the pressure level more accurately than most other gauges. The shell of the gauge is made of metal to resist corrosion and impact.
Moreover, it is compatible with any type of air compressor. Overall, it is one of the best air compressor pressure regulators and filters according to my research. I am sure you will like it if you give it a try.
NANPU Compressed Air Filter Regulator
Specifications
- Material: Aluminum
- NPT Size: 3/8 Inch
- Flow Rate: 70 SCFM (2000 Liter/Minute)
- Operating Pressure: 0 – 145 PSI
- Weight: 35.2 Ounces
Review
The NANPU Compressed Air Filter Regulator has a lot to offer you. First of all, it has a polycarbonate bowl that is very durable and long-lasting. The metal guard of the bowl resists corrosion.
Secondly, if there is no pressure the drainage column automatically opens to let the air out. It also automatically closes when the air passes. This is really helpful in increasing the performance of your air compressor.
Finally, this filter regulator is very easy to install. It also comes with some additional useful accessories like a thread sealant. The sealant effectively prevents air leakage.
T-H-B CO EDGE Industrial Mini Pressure Regulator
Specifications
- Pressure Range: 7 – 140 PSI
- NPT Size: ¼ Inch
- Gauge Size: 1.5 Inch Dial
- Flow Rate: 38 CFM
- Weight: 11.4 Ounces
Review
The T-H-B CO EDGE Industrial Mini Pressure Regulator comes with a wall mounting bracket and a pressure gauge. The mounting bracket will help you to easily mount it in your desired position.
It includes a locking composite knob. The knob is high-impact and durable. There are outlet and inlet ports marked. The marks will show the flow direction. This is really helpful.
The pressure gauge included here shows an accurate pressure level. Overall, it is one of my favorite filter regulators and you will also like it once you try it.
You can also get the T-H-B CO EDGE Industrial Heavy Duty Compressed Air Filter Regulator instead of the above one if you want your regulator for heavy-duty work. Its NPT size is also different than the above one.
And if you want a cheaper one, you can get the Air Pressure Regulator for Compressor by THB. It will also serve you well for a long time just the above two filter regulators by THB Co Edge Industrial.
PneumaticPlus SAU320-N03G Compressed Air Filter Regulator
Specifications
- Operating Pressure: 0 – 150 PSI
- Flow Rate: 72 SCFM at 90 PSI
- NPT Size: 3/8 Inch
- Weight: 27.52 Ounces
Review
The PneumaticPlus SAU320-N03G Compressed Air Filter Regulator will provide you an effective pressure control and air filtration. This is why I chose it as the best air compressor regulator filter.
This is not only an air pressure regulator but also a filter that will remove harmful debris as small as 10 microns. There are multiple drain and bowl options for you to match your needs.
The SAU320-N03G is compatible with an NPT size of 3/8 inch as I have mentioned in the specifications above. But there are a few more filter regulators you can get from PneumaticPlus that have different specifications.
For example, the SAU420T-N04G-MEP and the SAU420-N04G-MEP are almost the same but the first one has a T-handle. This is the only difference between these two. Both have ½ inch NPT size.
If you want a filter regulator for higher flow and smaller debris size, you can get the SAW400-N04BG. You can get the SAU400A-N04G – Dual Air System if you want to have both 3/8 inch and ½ inch NPT size.
Air Compressor Regulator by LE LEMATEC
Specifications
- Material: Zinc
- Operating pressure: 0 – 140 PSI
- NPT Size: ¼ Inch
- Weight: 8 Inch
- Display Unit: PSI, bar
Review
The Air Compressor Regulator by LE LEMATEC is a great air regulator for airflow control. It has an increased regulator sensitivity for precise control. This air regulator is suitable for ¼ inch outlet and inlet configuration.
You can rely on this regulator as it is designed to withstand rough and tough applications. There is a metal gauge that will show you the pressure level accurately. The gauge is also very durable and long-lasting.
It is very lightweight and compact. The size will not take up too much space. Moreover, it can resist solvents and impact efficiently. Overall, this is a great air compressor pressure regulator.
Buying Guide for the Best Air Regulator for Compressor
It is a bit tricky to find the best air compressor filter regulator. But if you follow my instructions you can find the right air regulator for your air compressor. There are a few features you have to keep in mind about that. These are
The NPT Size
This is the size of the inlet and the outlet of the regulator. Both the inlet and outer are connected to your compressor. There are some regulators that have universal NPT size and they will fit any air compressor.
On the other hand, some regulators have fixed NPT sizes for particular air compressors’ NPT. You have to match this size with your air compressor to get the right regulator for your compressor.
Operating Pressure Level
The operating pressure level will let you set the maximum pressure to a particular level. This has to match your air compressor too.
If the air compressor provides a high pressure that the regulator cannot withstand on the inlet, the regulator will get damaged. So always get a regulator that has a higher operating pressure level than your air compressor.
Type of The Regulator
Some regulators are only for regulating air pressure and some are for filtering the air too. If you only need the regulator you can get the one that has no filter. But if you want a regulator with an air filter, you can also find this in my list above.
Extra Accessories
No matter how well the regulator is built, it will eventually leak a little air. To avoid this, you can use thread sealants. If you want, you can get a set of air regulators and thread sealant. That way you don’t have to buy the sealant separately and you can save some money.
Frequently Asked Questions
Do I need a regulator on my air compressor?
Some air compressors require a regulator and some don’t. The ones that require a filter regulator or air pressure regulator usually come with a built-in regulator. But the built-in regulator gets damaged over time. In this situation, you need to get an air pressure regulator separately for your compressor.
How does an air compressor regulator work?
There is a set screw that controls the airflow through the tank. A spring is connected to the screw shaft. The air pressure is set by the pressure of this spring.
There is a diaphragm connected to the spring. When pressure is changed the diaphragm moves. So to keep a steady pressure the regulator simply controls the movement of the diaphragm.
What is regulated pressure on an air compressor?
Regulated pressure is the pressure you set for the airflow through the air compressor. The pressure regulator is used to regulate this pressure. The pressure should always be lower than the maximum pressure your compressor can handle.
What is the purpose of an air regulator?
The purpose of an air regulator is to keep the air pressure of your air compressor at a constant level. Some air regulators also have filters to separate water from the air. These are called air filter regulators.
How do you adjust a regulator?
It is really simple and easy to adjust the regulator. After connecting the regulator to your air compressor turn the knob right to increase the pressure level. Turn the knob left to decrease the pressure level. By decreasing or increasing you can set the pressure to your desired level.
My Final Tips
I hope now it will be easier for you to get the best air regulator for a compressor. For my final tips, I would like to say that always check the NPT size and pressure level of the regulator and match it with your air compressor before you purchase.
If you want, you can get only the pressure regulator or you can get the air filter regulator. The filter regulator will help you not only to regulate the pressure but also to separate water and debris from the air.
Finally, if you have some other questions regarding the air compressor filter regulator, feel free to ask me in the comment section. Thank you.